Create a new NDI output in file>workspace settings>video>output routing>new output route, call it something sensible such as DiCaffeine - Show Name.

Next head to Video Outputs and Create one or more stages set to the area(s) you wish to project onto (using the warping tab). It is worth remembering that if you're final projected area is of a different aspect ratio to the initial area you will need to adjust the resolution to match so that what you're projecting doesn't get squished.

Select the icon which looks like some camera film. This creates a video cue. Set a source as normal for a Qlab cue, then on the I/O page use the video output drop down to select the stage you wish to project it on.

NDI is a protocol where you throw Projection onto the network from one computer and then have another computer listening on the same network to then display it. You need the IP address of the diCaffeine box to be able to restart it once you start sending NDI.

Dicaffeine is an NDI receiver and output solution whose physical form is an installation running on a Dell mini PC (which is labelled as stagesoc-ndi). The configuration interface is available at [IP address]. Ask someone who Knows for the password. or guess it.

The iSolutions projector should project anywhere you might want it to, and is probably better than anything else we could get or hire in anyway.

Put the Dicaffeine box on the lectern and connect the HDMI fly lead and power, and turn the box on. Use the Sy panel and turn the projector on and change the input. You'll also need to roll the projector screen back up. This involves prodding around inside the lectern - ask someone to show you how to do this the first few times. It is quite simple though.

The projector can be adjusted to project elsewhere within reason. This is quite a finicky process and shouldn't be done unless you know what you are doing. If you need to read this and are expecting help, then you probably should not do this yourself. Go and find the Annex Officer and ask. If you change this, it MUST be reset after EVERY SHOW so it is ready for teaching the next day. iSolutions will be sad if they have to come and fiddle with the projector because StageSoc have moved the projection zone, and then they might just say we cannot use the projector at all any more, which is not good.