Create a new NDI output in file>workspace settings>video>output routing>new output route, call it something sensible such as DiCaffeine - Show Name.

Next head to Video Outputs and Create one or more stages set to the area(s) you wish to project onto (using the warping tab). It is worth remembering that if you're final projected area is of a different aspect ratio to the initial area you will need to adjust the resolution to match so that what you're projecting doesn't get squished.

Select the icon which looks like some camera film. This creates a video cue. Set a source as normal for a Qlab cue, then on the I/O page use the video output drop down to select the stage you wish to project it on.

NDI is a protocol where you throw Projection onto the network from one computer and then have another computer listening on the same network to then display it. You need the IP address of the diCaffeine box to be able to restart it once you start sending NDI.

We have a mini-PC running the software known as DiCaffeine. It automatically listens for NDI and displays it once its been turned on, but depending on if there was NDI being broadcast when you turned it on you may need to restart DiCaffeine

We use the installed isolutions projector via (George fill this in when you've made the thing)