Sidebar
wiki:annex:how_to_tardis
This is an old revision of the document!
Table of Contents
TARDIS
The small cupboard at the back of the room is called the TARDIS.
Sound Rack
put a clearer photo in here
This diagram shows the important cable connections in the back of the rack as of December 2021. sound_rack.pdf
1 - Aux In
This input makes it easy to feed a stereo signal (e.g. from a phone or laptop) into the main speakers.
The knob allows you to adjust the volume of the sound.
The switch turns this input either mixing it to all of the Amps or routing it to a subsection of the outputs, designed for allowing you to play house music to the foyer while still preparing for the show in the annex.
All the things on this panel are connected to and processed by Tesira in the same rack.
2 - MOTU Audio Interface
This is an audio interface that may be used to get audio in and out of the sound PC but is currently not patched so requires manual patching from the back if you want to use it
This has 8 line input and 8 line outputs and a pair of mic inputs on the front
The MOTU can be connected to the Sound PC by USB.
3 - Tesira
Tesiraforte AVB VI used to provide speaker-specific EQs, feedback suppression and most importantly limiters.
Connecting it by USB to a computer via USB enables use of it as an audio interface, currently setup with 8 channels of audio connected 1-1 with the outputs to the amps
| Number | Input | Output |
|---|---|---|
| 1-4 | From patch panel 1A-1D | Amp 1A-1D |
| 5-6 | From patch panel 2A-2B | Amp 2A-2B |
| 7-8 | From patch panel 3A-3B | Amp 3A-3B |
| 9-10 | Aux | N/A |
| 11-12 | From patch panel spare mic level lines | N/A |
4 - Amps / Small store / Ties / other Patch
This Patch Bay connects outputs and ties to the small store patch panel, the Amps and miscellaneous ties around the annex. There are several different modes in use.
| Number | Out (A, top) | In (B, bottom) | Mode |
|---|---|---|---|
| 1-4 | Small store mics 1-4 | Small store mics 9-12 | Thru |
| 5-8 | Small store mics 5-8 | Small store ties 1-4 | Thru |
| 9-14 | Tie 1-6 (From desk) | Tie 1-6 (To stageboxes) | Normal |
| 15-16 | Booth 1-2 | Tesira inputs 11-12 | Thru |
| 17 | Return 1 | Amp 1A | Half Normal |
| 18 | Return 2 | Amp 1B | Half Normal |
| 19 | Return 3 | Amp 1C | Half Normal |
| 20 | Return 4 | Amp 1D | Half Normal |
| 21 | Return 5 | Amp 2A | Half Normal |
| 22 | Return 6 | Amp 2B | Half Normal |
| 23 | Return 7 | Amp 3A | Half Normal |
| 24 | Return 8 | Amp 3B | Half Normal |
Notes:
- Tesira inputs 11-12 are configured to be a set of auto mixing mic inputs
- Return 1-8 are loomed with network cables, not to be confused with tie 1-6.
- Amps go through Tesira after this patch panel and before the amps.
5 - Mic Line Patch Panel
This allows you to route the Mic lines from the stage left and right patch panels to specific input lines in the multicore loom to the desk.
This panel uses the normal mode
6 - StageSoc Sound PC
7 - Amplifier A
This is the main amplifier that drives the main speakers in the annex.
The inputs to the amps come from Tesira and the output speakon connectors go into the patch panel behind the rack and come out on either side of the stage.
1-2 are for the tops (TOP R and TOP L) 3-4 are for the subs(SUB R and SUB L)
8 - Amplifier B
MonL/MonR
9 - Amplifier C
Foyer, etc.
wiki/annex/how_to_tardis.1692364780.txt.gz · Last modified: 2023/08/18 13:19 by Simon_Ruddock
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
